http://bostomaticusers.us/Forums/index.php? http://bostomaticusers.us/Forums/index.php?tid=203&tpg=1#p512 Thu, 17 May 2012 20:04:30 GMT http://bostomaticusers.us/Forums/index.php?tid=203&tpg=1#p512 http://bostomaticusers.us/Forums/index.php?tid=203&tpg=1#p511 Wed, 16 May 2012 15:37:03 GMT http://bostomaticusers.us/Forums/index.php?tid=203&tpg=1#p511 http://bostomaticusers.us/Forums/index.php?tid=203&tpg=1#p509 It is used on the PTI TR3030 drive.
I have the print but without the components description. (see attached)]]> Mon, 14 May 2012 23:19:23 GMT http://bostomaticusers.us/Forums/index.php?tid=203&tpg=1#p509 http://bostomaticusers.us/Forums/index.php?tid=188&tpg=1#p490 Sun, 29 Apr 2012 18:58:33 GMT http://bostomaticusers.us/Forums/index.php?tid=188&tpg=1#p490 http://bostomaticusers.us/Forums/index.php?tid=188&tpg=1#p489 My focus atm is bolt patterns m2005 in particular, this is what I have so far...
G92D100
N1
G90
G141
T1M0
G48SV12
V60DV3
V67D[[V11*V12]*100000]
V77DV1
V78DV2()
V79D32606
V80DV6()
M3M8
M2005
M5M9
Z4.R
X0.Y0.R
G49
M00
G94D100
M2
.....
Any advice is appreciated or direction to programming examples or books for the (I do have the manuals but I haven't come across a good prog. example)
BDC 3200/4000 type mill.

CHEERS ]]> Sat, 28 Apr 2012 12:50:19 GMT http://bostomaticusers.us/Forums/index.php?tid=188&tpg=1#p489 http://bostomaticusers.us/Forums/index.php?tid=173&tpg=1#p475 Thu, 12 Apr 2012 05:17:12 GMT http://bostomaticusers.us/Forums/index.php?tid=173&tpg=1#p475 http://bostomaticusers.us/Forums/index.php?tid=150&tpg=2#p473
As it turns out the manufacturer of the robot who was the first to be asked if it was possible to do and was assured it was, recanted yesterday after I let them know I had everything in place to proceed.

Needless to say I am disappointed.

Thank you for all of your efforts to help me.

Joe]]> Wed, 11 Apr 2012 11:00:16 GMT http://bostomaticusers.us/Forums/index.php?tid=150&tpg=2#p473 http://bostomaticusers.us/Forums/index.php?tid=173&tpg=1#p472 Please help....]]> Tue, 10 Apr 2012 15:44:32 GMT http://bostomaticusers.us/Forums/index.php?tid=173&tpg=1#p472 http://bostomaticusers.us/Forums/index.php?tid=150&tpg=2#p463 Mon, 26 Mar 2012 10:22:32 GMT http://bostomaticusers.us/Forums/index.php?tid=150&tpg=2#p463 http://bostomaticusers.us/Forums/index.php?tid=150&tpg=2#p462
Spoke with Barry, he wants to know if you have the info on the board, the vendor of it and any other pertinent info that we can use to track it down.

Also after some discussion, the question we came up with was, since we are already using a robot to change pallets, do we already have the board installed? If so can it be used to do tool changes as well or do we need a second board for tool changes?


]]> Mon, 26 Mar 2012 09:56:03 GMT http://bostomaticusers.us/Forums/index.php?tid=150&tpg=2#p462